MSC C10M-AL
The MSC C10M-AL module is based on Intel’s multi-core system-on-chip (SOC) Atom generation (codenamed “Apollo Lake”). It integrates next generation Intel processor core, graphics, memory, and I/O interfaces into one solution. Manufactured in 14nm processor technology this multi-core Atom processor provides outstanding computing and graphics power and is more power efficient compared to its predecessors. The new MSC C10M-AL brings dual independent display support, DirectX 12, fast DDR3L memory, two USB 3.0 and 6 USB 2.0 on a compact, power saving and cost-efficient COM Express Mini module. Different SOCs with dual- and quad-core processors are supported. Besides an extensive set of interfaces and features, the MSC C10M-AL optionally offers hardware based security compliant to the requirements of TCG (Trusted Computing Group). Type 10 pin-out supports digital display interfaces like DisplayPort, HDMI and DVI. The rugged design with soldered memory, optional ECC support and extended temperature range combined with a long-term availability commitment make it perfectly suited for modern IoT solutions.
Highlights
- Intel Atom X7-E3950 quad-core 1.6/2.0GHz, 12W
- Intel Atom X5-E3940 quad-core 1.6/1.8GHz, 9.5W
- Intel Atom X5-E3930 dual-core 1.3/1.8GHz, 6.5W
- Intel Pentium N4200 quad-core 1.1/2.5GHz, 6W
- Intel Celeron N3350 dual-core 1.1/2.4GHz, 6W
- Integrated Intel Gen. 9 HD graphics
- Up to 8GB DDR3L SDRAM (ECC option)
- Two SATA 6Gb/s mass storage interfaces
- eMMC option
- DisplayPort/HDMI/DVI interface
- LVDS/Embedded DisplayPort interface
- Two independent displays supported
- DirectX 12, OpenGL 4.3, OpenCL 2.0
- Two USB 3.0/2.0 and six USB 2.0 interfaces
- Two high-speed UARTs
- Up to four PCI Express™ x1 lanes
- UEFI Firmware
- Trusted Platform Module (option)
- Extended temperature variants
Specifications
| Technology: | x86 |
| Form Factor: | COM Express Mini |
| CPU: | Intel Atom X7-E3950 quad-core 1.6/2.0GHz, 18 EU GFX, 12W Intel Atom X5-E3940 quad-core 1.6/1.8GHz, 12 EU GFX, 9.5W Intel Atom X5-E3930 dual-core 1.3/1.8GHz, 12 EU GFX, 6.5W Intel Pentium N4200 quad-core 1.1/2.5GHz, 18 EU GFX, 6W Intel Celeron N3350 d |
| Chipset: | SOC |
| RAM: | up to 8GB DDR3L@1.35V SDRAM soldered on board, ECC optional |
| Flash: | eMMC option |
| Storage Interfaces: | 2x SATA 6Gb/s |
| USB: | 2x USB 3.0,rnrn6 x USB 2.0,rnrn1 x USB 2.0/3.0 client |
| Serial Interfaces: | 2x HS UART |
| Bus Interfaces: | 4x PCI Express x1 Gen 2, LPC bus (Low Pin Count bus) |
| Display Controller: | Integrated Intel HD graphics Gen. 9 Up to 18 execution units (EU) DirectX 12.0, OpenGL 4.3, OpenCL 2.0 Full Profile; MPEG2, H.264 (L5.2), VC-1, WMV9, VP8, JPEG/MJPEG, H.265 (HEVC), VP9, MVC |
| Display Interfaces: | Two independent displays supported: 1x Digital Display Interface (DP 1.2a (4096 x 2160 @ 60Hz), HDMI 1.4b (3840 x 2160 @ 30Hz) 1x Embedded DisplayPort 1.3 (on variants without LVDS only); 4096 x 2160 @ 60Hz, LVDS 24bit, single-channel, 1366 x 768 @ 6 |
| Network Interface: | 10/100/1000Base-TX (Intel i210) |
| Audio Interface: | High Definition Audio |
| Security Device: | TPM 2.0 (option) |
| Miscellaneous: | Watchdog Timer: Initiates system reset, programmable RTC battery: external System Monitoring: voltage, temperature, CPU fan, system fan |
| Feature Highlights: | Type 10 pin-out |
| Firmware: | AMI Aptio UEFI |
| OS Support: | Windows 10 (embedded) BSP for Linux on request EAPI (HW Programming Interface) |
| Power Requirement: | Wide range input +5 … +20V, 5V Stby optional, 7 W (typ.) up to 14 W (typ.) |
| Environment: | Ambient Temperature; 0° … 60°C (operating, commercial), -40° … 85°C (operating, industrial), -40° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions: | 84mm x 55mm |
| Certificates: | NO Certificates |