MSC NANORISC-IMX6 - Tria
MSC NANORISC-IMX6

MSC NANORISC-IMX6

nanoRISC® is a module concept combining the latest low power RISC controllers and embedded interfaces on a small form factor COM (Computer On Module). Ideally suited for embedded applications, a variety of easy-to-use interfaces are available.
The nanoRISC® form factor has been created for applications requiring a small form factor and lowest power consumption. nanoRISC® modules will be plugged onto an application-specific baseboard.
The design of the nanoRISC® IMX6 module is based on the NXP® Cortex™ A9 CPU offering high performance, lowest power consumption and a high degree of functional integration for high level embedded applications. The i.MX6x processor is combined with DDR3 SDRAM, SLC NAND Flash, 10/100/1000 Mbit Ethernet LAN and a power management controller (PMIC).
The module is available in commercial and industrial temperature range. Support for Linux is available. Android and Windows Embedded Compact 7 are available on request.

Highlights

  • NXP® i.MX6 Cortex™ A9, 1/2/4 core(s) CPU clocked up to 1.2GHz
  • up to 4GByte DDR3 SDRAM soldered
  • up to 4GByte SLC NAND soldered or
  • up to 64Gbyte eMMC Flash soldered
  • 10/100/1000 Base-T Ethernet Interface
  • USB 2.0 Host
  • USB 2.0 OTG Host/Client High Speed
  • Graphics Interfaces:
  • HDMI/DVI, LVDS or RGB up to 1920 x 1080
  • Dual independent display support
  • Video decoder and scaler
  • CAN 2.0B, 3x UART, 2x SPI, 2x I²C
  • is-audio-interface
  • SD V3.0 / SDIO V2.0 / MMC V4.3
  • Parallel Bus Interface
  • Camera Interface ITU656 / CSI
  • Commercial and extended commercial temperature range
  • Support for Linux and Windows EC7
  • Video decoder and scaler
  • CAN 2.0B, 3x UART, 2x SPI, 2x I²C
  • I²S Audio Interface
  • SD V3.0 / SDIO V2.0 / MMC V4.3
  • Parallel Bus Interface
  • Camera Interface ITU656 / CSI
  • Commercial and extended commercial temperature range
  • Support for Linux and Windows EC7

Specifications

TechnologyARM
Form FactornanoRISC
CPUNXP® i.MX6 ARM Cortex™ A9 i.MX6x
RAMUp to 4GB DDR3 SDRAM, soldered
FlashUp to 4GB NAND Flash soldered or up to 64 GB eMMC Flash (optional)
Storage Interfaces1x MMC / SD 1x microSD card socket on module
USB1x USB 2.0 HS (Host)

1x USB 2.0 OTG HS (Host or Client)
Serial Interfaces3x UART

2x I2C

2x SPI
Bus InterfacesLocal Bus Interface Controller Area Network Interface CAN 2.0B
Display ControllerVivante Graphics Accelerator in CPU
Display InterfacesRGB 16/18/24 bit up to 1920x1080 LVDS dual channel (1920x1080) or 2x single channel (1366x768) (RGB-TTL for single-core and dual-lite modules) HDMI/DVI up to 1920x1080
Network Interface10/100/1000 Base-TX
Audio InterfaceI2S Audio
MiscellaneousWatchdog Timer, Battery Charger - Supports 1x Lithium cell, LED Backlight Interface - Current Source for LED backlight
Feature HighlightsMicroSD card slot on module
FirmwareBootloader for Linux installed
OS SupportBSP for Linux, Android (Windows EC7, WEC2013 on request)
Power Requirement+5V DC +/-5% (Power Brick or USB) +3V6…+4V2 (single lithium cell)
EnvironmentAmbient Temperature 0°… 70°C (all components commercial temp. or better) -25°… 85°C (all components at least extended commercial temp) -40°… 85°C (all components industrial temp) -40°… 85°C (storage), Humidity 5 … 95% (operating, non-condensing) 5 … 95% (storage, non-condensing)
Dimensions70mm x 50mm
CertificatesUL / CE
CoolingHeatspreader recommended
Carrier100 x 160mm Evaluation Board nanoRISC-MB2

Order Info

Order No.DescriptionReferenceStatus
66478nanoRISC module based on NXP ARM Cortex-A9 i.MX6S Single-Core at 800MHz with 1GB DDR3 DRAM, 4GB eMMC Flash, USB 2.0 Host interface, USB 2.0 Host/Client interface, RGB interface (opt. LVDS), HDMI/DVI interface, CAN, 3x UART, 2x SPI, 2x I2C, I2S Audio, PCIe x1, industrial temperature range -40 to 85°CMSC NANORISC-IMX6-112PV
66484nanoRISC module based on NXP ARM Cortex-A9 i.MX6Q Quad-Core at 800MHz with 2GB DDR3 DRAM, 4GB eMMC Flash, USB 2.0 Host interface, USB 2.0 Host/Client interface, LVDS (opt. RGB) interface, HDMI/DVI interface, CAN, 3x UART, 2x SPI, 2x I2C, I2S Audio, PCIe x1, SATA-II, industrial temperature range -40 to 85°CMSC NANORISC-IMX6-143PV
66480nanoRISC module based on NXP ARM Cortex-A9 i.MX6D Dual-Core at 800MHz with 2GB DDR3 DRAM, 4GB eMMC Flash, USB 2.0 Host interface, USB 2.0 Host/Client interface, LVDS (opt. RGB) interface, DVI interface, CAN, 3x UART, 2x SPI, 2x I2C, I2S Audio, PCIe x1, SATA-II, industrial temperature range -40 to 85°CMSC NANORISC-IMX6-123PV
66482nanoRISC module based on NXP ARM Cortex-A9 i.MX6DL Dual-Core Lite at 800MHz with 2GB DDR3 DRAM, 4GB eMMC Flash, USB 2.0 Host interface, USB 2.0 Host/Client interface, RGB interface (opt. LVDS), DVI interface, CAN, 3x UART, 2x SPI, 2x I2C, I2S Audio, PCIe x1, industrial temperature range -40 to 85°CMSC NANORISC-IMX6-133 PV
67259nanoRISC module based on NXP ARM Cortex-A9 i.MX6DL Dual-Core Lite at 1GHz with 1GB DDR3 DRAM, 4GB eMMC Flash, USB 2.0 Host interface, USB 2.0 Host/Client interface, LVDS interface, HDMI/DVI interface, CAN, 3x UART, 2x SPI, 2x I2C, I2S Audio, PCIe x1, extended temperature range 0 to 85°CMSC NANORISC-IMX6-032PV

Accessories

Carrier Options

Order No.DescriptionReference
1122575Heatspreader for nanoRISC-IMX6 modulesMSC NANORISC-IMX6-01 HSP-001
1139861Heatspreader for nanoRISC-IMX6 modules with dual and quad core CPUs in industrial temperatureMSC NANORISC-IMX6-02 HSP-001

Starter Kits

Order No.DescriptionReference
45016Starterkit for MSC NANORISC-AM335X and NANORISC-IMX6 modules. Includes MSC NANORISC-MB2 Baseboard, Power Supply, Cable Kit, Debug Adapter and 7 inch WVGA LCD with PCAP touch mounted on an aluminium frame. Please order the nanoRISC module of your choice and the suitable SD Card with Linux OS installation separatelyMSC NANORISC SK MB2 002 KIT002

Talk to the experts!

Let us know about your product or your challenge and our team will get in touch to discuss how we can help.

Let's Talk

TALK TO THE EXPERTS

Let us know about your product or your challenge and our team will get in touch to discuss how we can help.

Let's Talk
Contact Us