TRIA SM2-MB-EP2
- SMARCâ„¢ 2.2 carrier board for full size and short size modules
- HDMI and 2x DisplayPort connectors
- 2x LVDS JILI30 connectors & eDP connectors
- Two Gigabit Ethernet ports
- 4x PCI Express x1 Gen 3 slots
- 1x Mini PCI Express x1 Card slot and 2x M.2 slots
- One SATA-III connector or M.2 slot
- Full USB 2.0 / 3.0 support
- Different USB Connectors: Type A, Type C, MicroUSB, Serial Debug)
- Full Legacy Interface supportCAN, SPI, eSPI, SMBus, I2C and GPIO
- CAN, SPI, eSPI, SMBus, I2C and GPIO
- HD or I2S audio interface
- 2x MIPI CSI-2 camera interface
- SD Card socket
- Fan connector
- CMOS battery
- ATX Power Connector or single power jack with wide ragne power input (8-24V)
- ATX Form Factor (244 x 305 mm)
The new SMARCâ„¢ 2.2 embedded platform TRIA SM2-MB-EP2 offers the possibility to test all the functional interfaces of SMARC 2.2 without compromises. This carrier board is the largest TRIA carrier board (e.g. compared to EP1, EP5, or EP6), but without any limations of the functional feature set.
Outstanding is that all PCI Express interfaces are avaialbel on x1 slot, or could be multiplexed to mini PCI Express slot, m.2 slots, or support the SMARC SERDES (ETHERNET) feature.
Universal Audio adapters can be assembled on both Audio Interfaces to support all Audio Interfaces and possiblities of the latest SMARC specification (like I2S, HDA)
The SMARCâ„¢ module slot of the EP2 platform is placed on the top side of the carrier board, which comes in the ATX form factor allowing easy integration into standard ATX enclosures.
Order Info
| Order No. | Description | Reference | Status |
| 115161 | SMARC 2.2 Evaluation Carrier Board, Full size ATX,with 4x PCI Express x1 slots, GbE, SATA, USB 3.0, USB 2.0, USB 2.0 OTG, RS232, CAN, SPI, eSPI, SMBus, I2C and GPIO interface, LVDS/eDP, DisplayPort and HDMI display interface, HD/I2S audio interface, MIPI CSI-2 camera interface, mini PCI Express and m.2 card slots, SD card slot, fan connector, CMOS battery, ATX form factor (244 x 305 mm), ATX power connector and single 8-24V power jack, commercial temperature range 0..+60°C | MSC SM2-MB-EP2 ES1 PCBES | PV |
Accessories
5.0″ Display kit
| Order No. | Description | Reference |
| 81871 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM800480-050-KIT SETPAC |
7″ Display kit
| Order No. | Description | Reference |
| 78911 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM800480-070-KIT SETPAC |
10.1″ Display kit
| Order No. | Description | Reference |
| 78879 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). | MSC DIS-AM1280800-101-KIT SETPAC |
12.1″ Display kit
| Order No. | Description | Reference |
| 78880 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM1280800-121-KIT SETPAC |
Support
As registered customer you can directly create a ticket in our Support Center (Ticket) and visit our Technical Documentation Center (TechDoC)
Manual
